Utility Specialty Vehicles Products

Dual SMP Technology

Static Mixer No. 8 (K500008)

Dual SMP400P gun kit part.

Static Mixer No. 10 (K500010)

Dual SMP400P gun kit part.

Polyethylene Sleeve/Tube (K500020)

Dual SMP400P gun kit part. Holds sealant pack inside gun.

Dual SMP400P (Gun and Kit)

The handheld Dual SMP400P Gun is designed to deliver the adhesive and the B-Component at the proper ratio. This SMP adhesive gun uses a unique static mixer to meter and mix the adhesive and B-Component together that is then dispensed to achieve a bead of adhesive that will cure "through" in hours, not days.

13.5 oz. (400 mL) sausage air powered gun dispenses sausage and B-Component together at a 50:4 ratio.

B-Component (Cure Catalyst)

B-Component is a paste-like compound used as an accelerator for the curing process of Bostik SMP single component products. B-Component is used primarily with 70-03A SKF and 70-11 sausage packages. Also available in pails.

Resources

Hand Towels and Specialty Adhesive Remover

Bostik® Hand Towels and Specialty Adhesive Remover

Bostik® Hand Towels and Specialty Adhesive Remover is a great revolutionary, waterless cleaning towel. Cleans hands and tools in seconds with no rinsing, drying or residue. Also, removes Never-Seez® grease, adhesive, ink, paint, tar, cured or uncured urethane and other types of sealants, plus much more.

 

MSDS (http://msds.bostik-us.com)

Resources
958-G02 (Set Rounded Tip Spatulas 3-, 4-, 5-inch)

Stainless rounded tip spatulas to fry-tool any sealant into perfect finished joints. Recommended for all expansion joints and all other types of joints. Available as a set of 3 (3-inch, 4-inch, and 5-inch sizes).

Handguns (Cartridge, Sausage, Air and Battery Powered)

846-1 (10.1 oz. Cartridge Battery Powered Gun)

10.1 oz. cartridge battery powered gun with 6-speed regulator. Battery and one-hour charger included. Maximum speed of 23 inches per minute with auto-reverse to avoid cartridge run-on. 600 lb. force.

B26Q (28 oz. Cartridge Handgun)

26:1 thrust ratio; 28 oz. cartridge handgun.

ANISAM/3SC Dual Chamber Cartridge Air Gun

Dual chamber air gun for 10.1 oz  cartridge 70-07 sprayable seam sealer.

Front chamber can be closed for bead extrusion only.

B26QL (20 oz. Cartridge Extension Handgun)

26:1 thrust ratio; 28 oz. cartridge handgun with extension for comfortable upright dispensing.

41001 (10.1 oz. Cartridge Handgun)

7: 1 ratio; 10.1 oz. cartridges handgun for all low viscosity sealants like LoVOC Seal™, 1100FS, 1150FS, 2100SPS

B12S13 (13.5 oz. Cartridge/Sausage Piston Driven Gun)

12:1 thrust ratio; universal sausage and cartridge handgun for 13.5 oz. (400 mL) and 10.1 oz. cartridges. Uniques patented piston change-over technology to convert from sausage to cartridges.

702-G01 (20 oz. Cartridge Extension Air Gun)

28 oz. cartridge air powered gun with extension for comfortable upright dispensing. 120 psi pressure. (shows joist follower)

41004-2T (10.1 oz. Cartridge Handgun)

7: 1 ratio; 10.1 oz. cartridges handgun for all low viscosity sealants like LoVOC Seal™, 1100FS, 1150FS, 2100SPS

DL-32-T14E (13.5 oz. Sausage Battery Powered Gun)

13.5 oz. (400 mL) sausage battery powered gun. Supplied with disposable conical nozzle for joints up to 5/8-inch. 375 lb. force.

405-15E (28 oz. Cartridge Battery Powered Gun)

28 oz. cartridge battery powered gun. 600 lb. force. Supplied with disposable conical nozzle for joints up to 5/8-inch.

B1 (10.1 oz. Cartridge Handgun)

7:1 thrust ratio; standard 10.1 oz. cartridge handgun for all low viscosity sealants.

Dual SMP400 (13.5 oz. Sausage Air Gun)

50:4 ratio; 13.5 oz. (400 mL) sausage air powered gun dispenses sausage and B-Component (cure catylst) together.

B26 (10.1 oz. Cartridge Handgun)

26:1 thrust ratio; 10.1 oz. cartridge handgun for all medium viscosity sealants and adhesives; and the demands of cold weather use.

61006 (10.1 oz. Sausage Air Gun)

10.1 oz (400 mL) sausage air gun. 100 psi maximum.

846-1U (10.1 oz. Cartridge Handgun)

Ultra drive; 10.1 oz. cartridge handgun for heavy duty work or very viscous adhesive; and the demands of cold weather use. 1,100 lb. force.

B12S20 BOS GUN (20 oz. Sausage Handgun)

12:1 ratio; sausage handgun for 20 oz. and 600 mL sausages. Use air gun with 70-08A, 70-09, 70-12 and 1152FS. Comes with three large cone nozzles and three regular nozzles.

360-1 (10.1 oz. Cartridge Air Gun)

10.1 oz. cartridge standard air powered gun. Used with all industrial adhesives and sealants. 120 psi pressure.

61006-20 (20 oz. Sausage Air Gun)

20 oz. (600 mL) sausage air gun. 100 psi maximum.

Spray Nozzles for ANISAM/3CS Air Guns

N0Z001 (Red Inner Spray Nozzle)

Inner nozzle for the 10.1 oz. cartridge ANISAM/3CS primarily used with 70-07 and other sprayable seam sealer products. Oriffice is 1.5mm.

N0Z0010 (Black Inner Spray Nozzle)

Outer nozzle used with the ANISAM/3CS Air Gun and nozzles for sprayable seam sealers.

Advanced Hybrid Polymer Technologies

70-05A High Modulus SMP Adhesive

Bostik® 70-05A is a one-component adhesive, based on SMP technology, that has superior tensile strength after complete cure; suitable for bonding metal, wood, and fiberglass-filled polyester. Bonds are permanently elastic at temperatures between -40°F to 212°F. Solvent- and isocyanate-free.

Resources
70-07A SMP Sprayable Seam Sealer

Bostik® 70-07A is a one-component, fast curing, sprayable seam sealer that can be used for underbody coating or for overlapping seams between PVS, wood, and metal. Paintable after skin formation. Sandable after cure. Solvent-free, does not shrink or bubble. Isocyanate-free.

Resources
70-08A SMP Windshield Adhesive

Bostik® 70-08A is a one-component adhesive, high tensile strength; high green strength, which reduces and eliminates clamping and assembly times. Conforms to FMVSS 212, 1-hour drive-away time. Contains no solvents and is isocyanate-free. Comes with conic nozzle for narrow grooves (KCA version) or precut V-notch nozzle (KC version as shown). Available in black only. Designed for primerless windshield and glass bonding.

Resources
70-09 SMP Adhesive

Bostik® 70-09 is a high green strength version of 70-05. Used for bonding mirrors. Isocyanate-, solvent-, and corrosive additive-free. Slower curing speed versus other SMP products. Comes with precut V-notch nozzle. Available in white only.

Resources
70-11 SMP Adhesive

Bostik® 70-11 is a one-component adhesive, high tensile strength; outstanding green strength, which reduces and eliminates clamping and assembly times. Contains no solvents and is isocyanate-free. 70-11 has a longer skin time than 70-08 and is ideal when used with Dual™ accelerated technology.

Resources
2200 TS (Transportation Sealant) Advanced Hybrid

Bostik® 2200 TS (Transportation Sealant) is a one-component, moisture curing, adhesive/sealant based upon Bostik Hybrid Technology—which qualifies as CARB, OTC, and SCAQMD Compliant and contains no solvent (alcohols, xylene, etc.). Significant product benefits include fast skinning, (<30 minutes), 100% solids, and non-yellowing and is paint compatible.

Bostik 2200 TS exhibits medium thixotrophy resulting in overhead and vertical gap filling up to 0.5 inches without slump or sag.

Resources
70-12 SMP Windshield Adhesive

Bostik® 70-12 is a one-component adhesive, high tensile strength; very high green strength, which reduces and eliminates clamping and assembly times. 70-12 is a higher green strength version than 70-08. Conforms to FMVSS 212, 15-minute drive-away time. Contains no solvents and is isocyanate-free. Comes with precut V-notch nozzle.

Resources
70-03A SMP Elastic Bonding Adhesive

Bostik® 70-03A is a versatile, high strength adhesive used for panel bonding in truck, coach and bus manufacturing. Its good green strength reduces the need for extended assembly clamping time. Odorless, solvent-free and isocyanate-free SMP technology. Moisture curing within 15 minutes skin time. Designed for making elastomeric construction joints that require high strength. Solvent- and isocyanate-free.

Resources
70-03A SKF (Slow-Skinning) SMP Adhesive

Bostik 70-03A SKF is a slow skin forming (30 minutes) version of the 70-03A (15 minutes). Because of its slow skin time, 70-03A SKF is the ideal product for the Dual™ accelerated technology. Solvent- and isocyanate-free.

Resources

Windshield and Glass Bonding

Prep G "Black Out" Primer

Prep G is a "black out" primer to be used on glass, polycarbonate (PC) and acrylic glass (PMMA) without ceramic coating (frit) before dispensing the glazing 70-08A, 70-11 and 70-12 adhesives. Prep G glass adhesive provides ultraviolet light protection to the bond line.

Note: UV protection is required for all direct glazing bonding applications. Factory applied frits usually provide UV protection. Read and follow instructions in the Technical Data Sheet.

Resources
Prep M "Wash" Primer

Prep M improves bond strength of SMP-based products on most nonporous substrates, such as metals, and especially metal with mill-oil finish. In cases where high thermal or physical loads, especially under humid conditions requiring ultimate adhesion, use Prep M. A clean, dry and grease free substrate is necessary for ultimate adhesion. Read and follow instructions in the Technical Data Sheet.

Resources

Cartridge Nozzles

N0Z003 (Black Conic Cartridge Nozzle)

Ideal for backfilling windshield gaskets with 70-03A or 70-08A.

(Nozzle can be used with sausage if tightened on cartridge disk adapter.)

N0Z004 (White V-Shaped Cartridge Nozzle)

Ideal for elastic bonding applications; primarily used with 70-05, 70-08, 70-09, and 70-12.

(Nozzle can be used with sausage if tightened on cartridge disk adapter.)

Urethane Sealants

LoVOC Seal™ Urethane Sealant

Bostik® LoVOC Seal™ is a one-component, moisture curing, low VOC urethane sealant specifically designed to meet the demands of the transportation industry. Primarily targeted for joint/gap filling and seam/weldline applications where low shrinkage and excellent sealability is required at economical prices. LoVOC Seal™ possesses outstanding adhesion to aluminum, wood and FRP (Fiberglass Reinforced Polyester). It can be sanded and/or painted after tack free time has been achieved.

Resources
1100 FS (Fast Set) Urethane Sealant

Bostik® 1100 Fast Set is a one-part urethane sealant that cures by reaction with atmospheric moisture to form a tough, flexible seal. This urethane adhesive has tenacious adhesion to woods, metals, FRP and most plastics. 1100 FS can be used in bonding, beading and sealing applications.

Resources
1152FS Liquid Rivet Adhesive

Bostik® Liquid Rivet™ 1152FS is a one-component, moisture curing, polyurethane adhesive that has extremely high thixotropy and cured strength. Significant product benefits include ver high green strength and initial tack, excellethn elastic high strength bonds.

Resources

Sausage Nozzles

N0Z002 (Conic Sausage Nozzle)

Used with any sausage package and any sausage gun.

N0Z005 (V-Shaped Sausage Nozzle)

Ideal for elastic bonding applications; primarily for 70-04, 70-05, 70-08A sausage package with any sausage gun.