Webcrete™ 98 is a premium, fast-setting, specially-formulated, latex-fortified Portland cement patch for interior use. Webcrete 98 may be used to skim coat or feather-edge finish up to 1/2” deep in one application. Floor covering can be installed in as little as an hour after application. Webcrete 98 is extremely flexible and resilient for for patching and smoothing floors prior to the installation of ceramic tile, carpet, resilient and wood flooring. The high concentration of polymer in Webcrete 98 enables the use of this product as an embossed floor leveler when mixed only with water.
Durabond Hardwood Products
Surface Preparation
, 
DURALEVEL 83P Self-Leveling Underlayment
DURALEVEL™ 83P is a high compressive strength, self-leveling, cement-based underlayment used to repair, smooth and level concrete as well as existing ceramic, terrazzo or approved plywood subfloors prior to the installation of carpet, vinyl, VCT, laminate, solid and engineered hardwood flooring, ceramic or natural stone.
- DURALEVEL 83P is suitable for thickness from feather-edge to 1” thick, or up to 5” thick when mixed as designed with pea gravel. Use on, above or below grade.
- Use DURALEVEL 83P in smaller installations where it can be mixed by hand, or use underlayment pump to quickly cover large jobs.
Resources
Moisture Vapor Protection
D-261 Extreme Moisture Vapor Barrier Coating
D-261 Extreme Moisture Vapor Barrier Coating is a two-component, penetrating epoxy formulated to dramatically reduce moisture vapor transmission from substrates, including "freshly poured green concrete," properly-prepared concrete, cement backer board, cement patch underlayments, radiant heat flooring, and cemet-based terrazzo. Reduces moisture vapor transmission from substrates with Moisture Vapor Emission Rates as high as 25 lbs. with one coat.
Resources
, 
D-250 Moisture Vapor Barrier Coating
A high-performance, rapid-drying, water-based, penetrating epoxy formulated to dramatically reduce moisture vapor transmission and surface alkalinity from substrates including "freshly-poured" concrete, cement backer board, radiant heat flooring, and cement-based terrazzo prior to the installation of engineered or solid hardwood, carpet; vinyl/VCT, rubber; porcelain, marble, granite or ceramic tile floor covering. Bostik EMC is a low-odor, non-flammable, two-component system.
Resources
, 
Cleaner
Durabond Urethane Adhesive Remover
Durabond® Urethane Adhesive Remover is a readily-biodegradable, low-odor, water-rinseable solution. Use Durabond Urethane Adhesive Remover to remove wet and cured urethane adhesive from the surface of pre-finished (non-wax) wood flooring
Resources
